Kdesi dělám chybu na ESP8266 mi to funguje ale na ESP32 CAM mi to nefunguje nemyslím ten pin který testuji aby mi toho Wifi managera spustil ale provedení celého Wifi managera u ESP8266 mi to proběhne v pořádku
Kód: Vybrat vše
*WM: SET AP STA
*WM:
*WM: Configuring access point...
*WM: OnDemandAP
*WM: AP IP address:
*WM: 192.168.4.1
*WM: HTTP server started
*WM: Request redirected to captive portal
*WM: Handle root
*WM: Request redirected to captive portal
*WM: Request redirected to captive portal
*WM: Request redirected to captive portal
*WM: Handle root
*WM: Request redirected to captive portal
*WM: Request redirected to captive portal
*WM: Scan done
*WM: Můj přístupový bod
*WM: -46
*WM: wifi-2
*WM: -82
*WM: wifi.dvorecek_2G
*WM: -87
*WM: Sent config page
*WM: Request redirected to captive portal
*WM: Request redirected to captive portal
*WM: Request redirected to captive portal
*WM: WiFi save
*WM: Sent wifi save page
*WM: Connecting to new AP
*WM: Connecting as wifi client...
*WM: Already connected. Bailing out.
connected...yeey :)
Kód: Vybrat vše
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
*WM: SET AP STA
*WM:
*WM: Configuring access point...
*WM: OnDemandAP
*WM: AP IP address:
*WM: 192.168.4.1
*WM: HTTP server started
dhcps: send_offer>>udp_sendto result 0
*WM: Request redirected to captive portal
*WM: Handle root
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandl.
Core 1 register dump:
PC : 0x400014fd PS : 0x00060230 A0 : 0x800db7bb A1 : 0x3
A2 : 0x00000020 A3 : 0x0000001c A4 : 0x000000ff A5 : 0x0
A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x00000000 A9 : 0x3
A10 : 0x3ffb1ce0 A11 : 0x80000000 A12 : 0x3ffb1ce0 A13 : 0x0
A14 : 0x00ff0000 A15 : 0xff000000 SAR : 0x0000000a EXCCAUSE: 0x0
EXCVADDR: 0x00000020 LBEG : 0x400014fd LEND : 0x4000150d LCOUNT : 0xf
Backtrace: 0x400014fd:0x3ffb1cc0 0x400db7b8:0x3ffb1cd0 0x400db7df:0x3ffb1cf0 0x
Do obou programů ať jak na ESP8266 nebo na ESP32 cam je ten Wifimanager doplněn snažil jsem to dělat stejně a přece je v ESP32CAM někde chyba ? díky